Hot Products
China Suppliers Factory - New Generation Composite Material Roofing Tiles for Durable and Eco-Friendly House Roofs
Specification
| Product Name | Calcium Silicon Ancient Building Tile |
| Core Material | Sodium silicate + Nano modified calcium Carbonate + PMMA/ASA film |
| Surface | PMMA film coated, embossed with special logo |
| Width | 1050mm (Effective size 960mm) |
| Weight | 3.5kg - 5.5kg / sqm |
| Pitch | 220mm |
| Wave height | 30mm |
| Thickness | 2.0mm / 2.2mm / 2.5mm / 3.0mm |
| Color | Grey, Red, Orange, Blue |
| Brand logo | GUANG SHENG JIA |
| Service | Total solution for project / online technical support |
| MOQ | 200 SQM |
| Life span | 30 - 50 years |
| Application | Villas, bungalows, community buildings, flat to slope projects and so on |
Product Description
We designed this product with 3 layers Co-extruded. THE SURFACE LAYER IS THE PROTECTED LAYER, THE MIDDLE LAYER IS THE CORE SKELETON LAYER, THE BOTTOM LAYER IS THE ENHANCED PERFORMANCE LAYER.
The Surface Layer (PMMA Film)
Has many advantages, such as good weather resistance, strong physical and mechanical properties. It is covered on the surface of the tile to resist various invasions such as ultraviolet rays, wind and acid, alkali and salt substances in the natural environment, and enhance the structural stability of the tile under the environment of frequent alternation of high and low temperatures from -40° to 80°. The fading rate is very low.
The Middle Core Skeleton Layer
Made of sodium silicate and nano-modified calcium. Sodium silicate has good adhesion, which makes the tiles have good tensile strength and toughness. Nano-modified calcium has a better plasticizing effect and fewer impurities, which effectively improves the rigidity, toughness, finish, and bending strength of the tiles, and improves tiles processing performance and dimensional stability.
The Bottom Layer (Varies by Series)
The bottom layer is a little different due to different series products:
- THE BASIC SERIES PRODUCTS: Added with toughness-enhancing materials.
- THE HEAT-INSULATED SERIES: Added with thermal insulation.
- THE ENHANCED HEAT-INSULATED SERIES: The PVC + FIBERGLASS + PVC "sandwich" layer is coated as another heat-insulated layer.
The comprehensive performance of the product is enhanced successively.
Classification
Key features & benefits
1. Ultimate Durability
- Weather Resistance: Withstands extreme temperatures (-40°C to 80°C), heavy rain, hail, and UV radiation without cracking, fading, or warping.
- Corrosion & Chemical Resistance: Immune to rust, mold, acid rain, and salt spray, ideal for coastal and industrial areas.
- Impact Resistance: Reinforced structure absorbs shocks, ensuring longevity even in storm-prone regions.
2. Lightweight & Easy Installation
- 1/3 the weight of traditional clay or concrete tiles, reducing structural load and installation time.
- Modular design with interlocking systems allows for quick, tool-free assembly on various roof slopes.
3. Eco-Friendly & Energy-Efficient
- Weather Resistance: Withstands extreme temperatures (-40°C to 80°C), heavy rain, hail, and UV radiation without cracking, fading, or warping.
- Reflective surface reduces heat absorption, lowering indoor cooling costs by up to 30%.
4. Aesthetic Versatility
- Available in multiple colors (terracotta, slate gray, charcoal, etc.) and textures to mimic natural clay, wood, or stone.
- Sleek, uniform finish enhances curb appeal for modern and traditional architecture alike.
5. Low Maintenance
- Non-porous surface prevents dirt accumulation; easily cleaned with water.
- No need for periodic painting or sealing.
Accessories
Installation
1
We suggest the roofing slope angle is between 20-80 degree.
2
Line. Installation should be arranged in advance in order to ensure smooth and beautiful.
3
Install purline. Purline size suggest square tube (60mm*40mm*3mm), or Section steel (100mm*50mm*3mm), or wooden square (60mm*40mm). The metal purlins shall be treated with anti-rust treatment. The wooden square must be treated with anti-corrosion. The space between 2 purlines should be less than 600mm. The uppermost purlin is 150mm away from the roof ridge line, which is convenient for the installation of main ridge tiles, and the lowermost purlin is 50-70mm away from the eaves.
4
Deal with the oblique gutter and flashing. Gutter size is according to the project building size at site. Fix the oblique gutter on purline.
5
Install main tile for the roof main slope. Roof tile installation on main slope should use the right fixing tools. Use electric drill to make holes and keep hole diameter 2mm bigger than screw. Tapping screws with diameter of 6.3mm is recommended. It can't fix too hard to tight. When installing roof tile, it should be opposite to local wind direction. Two slope installation at the same time. Ensure the main ridge tile installation without any problem.
6
Install main tile for the roof secondary slope. Roof tile installation on secondary slope. Set the central line of triangle slope as a benchmark. Installation is from the benchmark to both sides average. Cutting along with the Hypotenuse of the triangle slope, in preparation for installing tilted ridge tile. Make sure no obvious gap between 2 slopes.
7
To install the main ridge tile, be sure to install it sequentially from one side to the other, to avoid overlap on two main sheets.
8
Install the tilted ridge roof tile. When installing the tilted ridge tile, it must fix on the main tile purline. The overlap place for 2 tilted ridges should be at least 90mm.
9
Install the three-way ridge tile. Connect three side slope roofing. Fix on the top of main ridge and 2 tilted ridges.
10
Install the cover of tilted ridge.
11
Deal with the projecture on roofing and seal joins.
12
Install all of the eaves board and the endcaps of main ridge tile.
Project case
Packing and shipping
Frequently Asked Questions (FAQ)
Q: What is the lifespan of Calcium Silicon Ancient Building Tiles?
These tiles are designed to be highly durable with an expected lifespan of 30 to 50 years.
Q: What materials are used in the core structure of the tiles?
The core material consists of sodium silicate for excellent adhesion and tensile strength, combined with nano-modified calcium carbonate to improve rigidity and bending strength.
Q: Are these tiles suitable for extreme weather conditions?
Yes. Thanks to the protective PMMA surface layer, the tiles can withstand extreme temperatures ranging from -40°C to 80°C, and they offer high resistance to UV rays, wind, rain, and chemical corrosion.
Q: What is the recommended roof slope angle for installation?
We suggest installing these building tiles on roofs with a slope angle between 20 and 80 degrees.
Q: How heavy are the tiles compared to traditional roofing materials?
They are very lightweight, weighing only 3.5kg to 5.5kg per square meter, which is approximately 1/3 the weight of traditional clay or concrete tiles.
Q: What is the Minimum Order Quantity (MOQ) and available colors?
The MOQ is 200 square meters. The tiles are available in Grey, Red, Orange, and Blue colors.