Hot Products
China Suppliers Factory New Generation Composite Roofing Tiles - Durable, Eco-Friendly ASA/PMMA Products for Homes
Specification
| Product Name | Calcium Silicon Ancient Building Tile |
| Core Material | Sodium silicate+Nano modified calcium Carbonate +PMMA/ASA film |
| Surface | PMMA film coated, embossed with special logo |
| Width | 1050mm (Effective size 960mm) |
| Weight | 3.5kg - 5.5kg / sqm |
| Pitch | 220mm |
| Wave height | 30mm |
| Thickness | 2.0mm \ 2.2mm \2.5mm \3.0mm |
| Color | Grey, Red, Orange, Blue |
| Brand logo | GUANG SHENG JIA |
| Service | Total solution for project \ online technical support |
| MOQ | 200SQM |
| Life span | 30 - 50 years |
| Application | Villas, bungalows, community buildings, flat to slope projects and so on |
Product Description
We designed this product with 3 layers Co-extrusted. THE SURFACE LAYER IS THE PROTECTED LAYER, THE MIDDLE LAYER IS THE CORE SKELETON LAYER, THE BOTTOM LAYER IS THE ENHANCED PERFORMANCE LAYER.
The surface layer PMMA film have many of advantages, such as good weather resistance, strongly physical and mechanical properties. It is covered on the surface of the tile to resist various invasions such as ultraviolet rays, wind and acid, alkali and salt substances in the natural environment, and enhance the structural stability of the tile under the environment of frequent alternation of high and low temperatures from -40° to 80°. And the fading rate is very low.
The middle core skeleton layer is made of sodium silicate and nano-modified calcium. Sodium silicate has good adhesion, which makes the tiles have good tensile strength and toughness. Nano-modified calcium has better plasticizing effect, and less impurities, which effectively improves the rigidity, toughness, finish and bending strength of the tiles, and improves tiles processing performance and dimensional stability.
The bottom layer is a little different due to different series products:
THE BASIC SERIES PRODUCTS: It is added with the toughness-enhancing materials.
THE HEAT-INSULATED SERIES: This layer is added with thermal insulation.
THE ENHANCED HEAT-INSULATED SERIES: The PVC+FIBERGLASS+PVC “sandwich layer is coated as another heat-insulated layer.
The Comprehensive performance of the product is enhanced successively.
Classification
Key features & benefits
1. Ultimate Durability
Weather Resistance: Withstands extreme temperatures (-40°C to 80°C), heavy rain, hail, and UV radiation without cracking, fading, or warping.
Corrosion & Chemical Resistance: Immune to rust, mold, acid rain, and salt spray, ideal for coastal and industrial areas.
Impact Resistance: Reinforced structure absorbs shocks, ensuring longevity even in storm-prone regions.
2. Lightweight & Easy Installation
1/3 the weight of traditional clay or concrete tiles, reducing structural load and installation time.
Modular design with interlocking systems allows for quick, tool-free assembly on various roof slopes.
3. Eco-Friendly & Energy-Efficient
Weather Resistance: Withstands extreme temperatures (-40°C to 80°C), heavy rain, hail, and UV radiation without cracking, fading, or warping.
Reflective surface reduces heat absorption, lowering indoor cooling costs by up to 30%.
4. Aesthetic Versatility
Available in multiple colors (terracotta, slate gray, charcoal, etc.) and textures to mimic natural clay, wood, or stone.
Sleek, uniform finish enhances curb appeal for modern and traditional architecture alike.
5. Low Maintenance
Non-porous surface prevents dirt accumulation; easily cleaned with water.
No need for periodic painting or sealing.
Accessories
Installation
1
We suggest the roofing slope angle is between 20-80 degree.
2
Line. Installation should be arranged in advance in order to ensure smooth and beautiful.
3
Install purline. Purline size suggest square tube (60mm*40mm*3mm), or Section steel (100mm*50mm*3mm), or wooden square (60mm*40mm). The metal purlins shall be dealed with anti-rust treatment. The wooden square must be treated with anti-corrosion. The space between 2 purlines should be less than 600mm. The uppermost purlin is 150mm away from the roof ridge line, which is convenient for the installation of main ridge tiles, and the lowermost purlin is 50-70mm away from the eaves.
4
Deal with the oblique gutter and flashing. Gutter size is according to the project building size at site. Fix the oblique gutter on purline.
5
Install main tile for the roof main slope. Roof tile installation on main slope should use the right fixing tools. Use electric drill to make holes and keep hole diameter 2mm bigger than screw. Tapping screws with diameter of 6.3mm is recommended. It can't fix too hard to tight. When install roof tile, it should be opposite to local wind direction. Two slope installation at the same time. Ensure the main ridge tile installation without any problem.
6
Install main tile for the roof secondary slope. Roof tile installation on secondary slope. Set the central line of triangle slope as a bench mark. Installation is from the bench mark to both sides avergely. Cutting along with the Hypotenuse of the triangle slope, in preparation of installing tilted ridge tile. Make sure no obvious gap between 2 slopes.
7
To install the main ridge tile, be sure to install it sequentially from one side to the other, to avoid overlap on two main sheets.
8
Install the tilted ridge roof tile. When install the tilted ridge tile must fix on main tile purline. The overlap place for 2 tilted ridge at least 90mm.
9
Install the three way ridge tile. Connect three side slope roofing. Fix on the top of main ridge and 2 tilted ridges.
10
Install the cover of tilted ridge.
11
Deal with the projecture on roofing and seal joins.
12
Install all of the eaves board and the endcaps of main ridge tile.
Project case
Packing and shipping
Frequently Asked Questions (FAQ)
What is the lifespan of the Calcium Silicon Ancient Building Tile?
These tiles are designed with high-quality co-extruded layers and possess a durable lifespan of 30 to 50 years under normal environmental conditions.
What makes these building tiles resistant to extreme weather?
The surface layer is coated with PMMA film, which provides exceptional weather and UV resistance. It protects the structural integrity of the tile from cracking or warping in temperatures ranging from -40°C to 80°C.
What is the recommended roof slope angle for installing these tiles?
We recommend a roofing slope angle between 20 and 80 degrees to ensure proper drainage, alignment, and aesthetic appeal.
How heavy are the Calcium Silicon Tiles compared to traditional options?
They are highly lightweight, weighing only 3.5kg to 5.5kg per square meter, which is approximately 1/3 the weight of traditional clay or concrete tiles. This significantly reduces structural load.
Do these tiles require regular maintenance?
No, they require very low maintenance. Their non-porous surface prevents dirt accumulation, allowing them to be easily washed clean with rain or water, and they never require periodic painting or sealing.